E-MART易買得公司介紹：
E-MART超市是韓國新世界集團旗下的大型綜合超市，其最大的特點就是“百貨超市”的經營業態。
據介紹，百貨超市即所經營的商品除了傳統綜合超市經營的商品外，還增加了化妝品、服裝等百貨商場中的商品。并且經營品牌豐富，服裝偏重高檔化，一些品牌服裝也將進入超市，設立品牌專柜。這種新型業態在本市尚屬首家。
此外，超市的貨物擺放將不同于傳統超市的高貨架方式，而是推出類似百貨商場的低貨架擺放，方便顧客取放商品。
? 易買得超市經營韓國特色商品
E-Mart驗廠中需要對工廠以下項目進行評估:
A.生產設備
Facilities
?? ??
B.質量控制系統
Quality Control System
?? ?? ???
C.原材料檢驗
Incoming Inspection
??? ??
D.制造過程質量控制流程
In-process Quality Control
?? ?? ?? ??
E.最終檢驗
Final Inspection
?? ??
A.設施與工作環境-易買得驗廠咨詢（中英韓對照）
1. Are working areas and exits neat, clean and tidy with no obstructions?
???? ????? ??? ?????
工作場所和出入口是否干凈整潔無障礙？
2. Are the design and arrangement of the whole production process and machinery set-up acceptable?
E-mart/易買得超市是韓國新世界集團旗下的大型連鎖綜合超市，E-Mart驗廠中質量控制系統的審查如下：
1. Is the factory operating a formal internal quality control procedure on its products (with QC handbook or manual)?
(QC ??? ?? ???? ????) ?? ??? ?? ?? ?? ?? ??? ???? ?????
2. Are all QC
eMart驗廠來料檢驗要求：
1. Has the factory taken measures to make sure that raw materials conform with required specifications before use?
??? ??? ?? ? ?? ??? ?? ??? ?????
工廠在原材料使用前有確認標準的措施嗎？
2. Are incoming and outgoing raw materials registere
IN PROCESS QUALITY CONTROL生產過程中的質量控制（英韓對照）
1. Are all toolings fully tested and evaluated with for measurements and safety issues?
?? ??? ??&?? ?? ??? ? ??? ??????
2. Are samples of pilot run carefully reviewed by engineers and quality s
FINAL INSPECTION E-Mart驗廠最終檢驗
1. Do factory QC performs any internal final inspection on finished products?
QC? ???? ?? ?? ?? ??? ??????
QC對成品本身進行最終檢查？
2. Are international, E-mart or other approved standards used for final inspec
PACKAGING包裝
1. Is the packaging area tidy and free of contaminants?
?? ???? ???? ????? ?????
包裝領域是否整潔，無污染物？
2. Is there any safeguard to prevent another company’s products from being packaged into master cartons?
???? ?? ? ?? ?? ??? ?
NON-CONFORMING MATERIALS /??? ?? / 易買得驗廠不合格的材料控制
1. Is non-conforming material properly segregated at all stages?
??? ??? ?? ?? ???? ??? ???? ?????
不合格材料在各個階段是否正確的分離？
2. Is non-conforming material identified?
??? ??? ??? ??????
COMMUNICATION, DOCUMENTATION CONTROL AND WORK MOVEMENT 易買得驗廠通信，文件控制和工作流程
1. Are approved drawings and specifications used properly, filed in chronological sequence, and traceable?
被批準的圖紙和規范使用得當，提交時間順序具有可追溯性？
2. Are pre-production samples o 顯示 1 到 10 總計 10 (共 1 頁)
